AT-M1016 is an advanced unmanaged enterprise switch which provides dedicated 10/100Mbps Ethernet
bandwidth on each port. The ports will automatically detect the speed, duplex and MDI/MDIX status of
the device what it is connecting to, and adjust these settings accordingly. The switch ports can be used
on networking computers, printers, servers, routers, other switches or any devices equipped with an
Ethernet port.
  This stand-alone switch is very easy to set up, there is no network management required. Just power on
the switch and connect the cables. For best performance, use category 5 or better Ethernet cabling.

 .16 10/100Mbps Auto-Negotiation RJ45 ports, Supports Auto MDI / MDIX

.IEEE 802.3x flow control provides reliable data transfer

.Supports MAC address auto-learning and auto-aging

.Fanless design ensures quiet operation without any noise

.Store-and-Forward switching method

.Plug and Play design simplifies installation

.Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3x standards

.Sixteen 10/100Mbps Auto-Negotiation, Auto-MDI/MDIX ports provide smart switching between 10Mbps and 100Mbps hardware

.Non-blocking switching architecture enables full wire-speed packets forwarding and filtering

.Store-and-Forward switching method

.Supports 4K MAC address auto-learning and auto-aging

.Fanless design ensures quiet operation without noise